9-3 (9440) L4-2.0L Turbo (2007)
Convertible Top Latch: Service and Repair
Latch Fittings, Windscreen Frame
Latch Fittings, Windscreen Frame
Removing
1. Remove Windscreen frame upper rim, CV.
2. Left-hand side: Unplug the position sensor connector.
3. Remove the bolts for the latch fitting.
4. Remove the latch fitting.
5. Left-hand side: Remove the position sensor where appropriate by pressing in the lock tab with a screwdriver.
Fitting
1. Left-hand side: Fit the position sensor where appropriate.
2. Put the lock fitting in mounting position.
3. Fit the latch fitting bolts.