9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-4274009.png)
9. Fit the grab handle.
10. US/CA: Attach the emergency opening handle to the cable. Fit the handle to the trim. Check the function of the emergency opening handle.
11. Close the boot lid.
Rear Spoiler, CV (Aero)
Rear Spoiler, CV (Aero)
New spoiler, to fit
1. Open the boot lid.
US/CA: Remove the emergency opening handle from the trim.
2. Remove the closing handle on the inside of the boot lid. Remove the two stage rivets and remove the boot lid trim.
3. US: Remove the bolt for the emergency opening mechanism and move the mechanism aside.
4. Cut out the template sections and tape them together. Align the template sections guided by the lines.
Cars with telephone antenna on the boot lid: Cut out an area around the telephone antenna so that the template can be positioned flat on the boot
lid.
5. Position the template on the boot lid and at its four corners. Use adhesive tape to fasten the template at the boot lid emblem and on the front
corners of the boot lid. Check that the distance between the hole markings on the template corresponds with the positions of the studs on the
spoiler.
