9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2311004.png)
2. When changing hydraulic unit/control module: Press the control module in place on the hydraulic unit.
3. When changing the hydraulic unit/control module: Fit the bolts.
Note: Tighten the bolt alternately.
Tightening torque 2.5 Nm (1.8 ft. lbs.)
4. If the hydraulic unit/control module is changed: Fit the bracket to the unit.
Tightening torque: 10 Nm (7.5 ft. lbs.)
