9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-1200009.png)
6. Remove the exhaust camshaft and intake camshaft bearing caps no. 2 and no. 7. Position EN-48368 Adjustment tool, camshaft (B207 210 hp) and
EN-48366 Adjustment tool, camshaft (B207 150 - 175 hp) by manually pressing the tools down onto the camshafts without tightening the bolts.
Turn the camshaft until the tool aligns with the spanner on the camshaft flats. Tighten the adjustment tools' bolts (A).
Tightening torque 10 Nm (7 ft. lbs.)
