9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2904001.png)
Control Assembly: Service and Repair
ACC Unit (216)
ACC Unit (216)
Carry out measures before dismantling the control module.
To remove
1. Remove the ACC unit by carefully pulling out the ACC unit. Use 82 93 474 Removal tool to remove the unit.
IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight
apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection.
2. Remove the ACC unit's connector.
3. Lift out the ACC unit.
To fit
IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information
regarding connectors, refer to Connectors, handling and inspection.
1. Connect the ACC unit's connector.
