9-3 (9440) L4-2.0L Turbo (2007)
Multiple Junction Connector: Service and Repair
Connector H102-1, Pin/Sleeve Replacement
Connector H102-1, Pin/sleeve Replacement
WARNING: Airbag system cables must not be repaired. They are to be replaced in their entirety.
To remove
1. Remove Baffle, driver.
2. Remove the front scuff plates and the lower side panels of the A-pillars.
3. Use a screwdriver to press in the rear catches and remove the bonnet opening lever.
4. Undo the lock clamp.