9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2500001.png)
Fuse Block: Procedures
Procedure After Disconnecting The Battery
1. Clear diagnostic trouble codes in all systems.
IMPORTANT: Some diagnostic trouble codes can be generated if there is a voltage drop. These diagnostic trouble codes can be ignored and will
not be regenerated after deletion.
2. Set date and time.
3. Synchronise the remote control code by inserting the key into the ignition.
IMPORTANT: Draw the customer's attention to the fact that all remote controls must be synchronised by placing the key/keys in the ignition
lock. If this is not done, the remote control will not work.
4. Cars with pinch protection: Program the pinch protection.
WARNING: The trap protection is not active until the window lifters have been calibrated after a power failure.
