9-3 (9440) L4-2.0L Turbo (2007)
Steering Column Lock: Service and Repair
Steering Wheel Lock Unit, SCL
To remove
NOTE: The steering column lock must be unlocked for removal. The key must be in the ignition switch in the LOCK position.
1. Turn the key to LOCK and allow the key remain in the ignition switch.
NOTE: The steering column lock must be unlocked for this procedure.
2. Remove the sound insulating baffle on the driver's side.
3. Turn the steering wheel so that the steering shaft joint can be accessed.
Fixate the steering wheel with fabric-backed tape to the instrument panel so as to avoid damaging the contact roller.
4. Remove the steering shaft joint from the steering shaft.
5. Remove the connector.
6. Tighten the bolt fully to lift off the lock unit.