9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2768001.png)
Ball Joint: Service and Repair
Ball Joint Dust Excluder on the Suspension Arm
Ball joint dust excluder on the suspension arm
1. Raise the car.
2. Remove the wheel.
3. Remove the bolt holding the suspension arm to the steering swivel member.
Depress the suspension arm and hold it down by placing a wedge between the suspension arm and the anti-roll bar.
4. Clean around the end of the arm and the dust excluder.
5. Remove the upper locking ring by pulling with a screwdriver positioned between the ring and the dust excluder.
