9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2774004.png)
^
Clean, lubricate the bolt threads and remove the nut (A) which holds the toe-link to the steering swivel member.
^
Relieve the weight from the lower suspension arm with a pillar jack and remove the bolt (B).
Note
The bolt must be unscrewed from the suspension arm.
^
Remove the jack.
^
Clean, lubricate the bolt threads and remove the lower shock absorber mounting (C).
^
Remove the anti-roll bar link (D) from the steering swivel member.
^
Remove the upper suspension arm (E) from the steering swivel member.
^
Remove the steering swivel member (F) from the longitudinal link and lift the hub from the toe-link.
7. Remove the hub and the brake shield.
To fit
1. When fitting a new steering swivel member, transfer or fit a new bush in the steering swivel member. Remove the bush with KM 906-61-62, fit
with KM 906-63-64 included in kit 89 96 761.
