9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2150001.png)
Drive/Propeller Shaft: Service and Repair
Propeller shaft
Important:
When removing/fitting the propeller shaft, special tool DT-49035 Holder, Propeller Shaft must be used to prevent the shaft from being bent
or the ties from being damaged due to being bent too forcefully.
During manual handling, the propeller shaft must be lifted at the front and rear sections in order to prevent the ties from being damaged due
to being bent too forcefully.
To remove
1. Remove Rear catalytic converter, B284, 4WD
2. Mark out the position of the mountings (A), use spray paint.
