9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2175005.png)
10. Loosen the cable adjusters in the gear lever housing with a screwdriver. Press down the blade carefully with a screwdriver in the cable adjuster and
pry slightly towards the gear lever. A click will be heard when the adjuster catch has engaged. Repeat the procedure on the other side of the cable
adjuster.
Important: Ensure that the wire adjustment is not damaged.
11. Press the catches and detach the cable sheaths from the gear lever housing. Lift the air duct slightly with a large screwdriver when the detaching
the cable sheaths.
12. Pull out the cables through the engine bay.
To fit
1. Insert the cable through the engine bay.
2. Attach the cable sheaths and cables to the gear lever housing. Fit the black and white cables on the black and white adjusters respectively.
