9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-2178002.png)
3. Remove the four shift rails.
4. If the forks and drivers need replacing, tap out the expanding pins and remove the forks and drivers. Note positions for refitting. Expanding pins
should always be replaced for assembly.
Check all components for wear. Change any parts which are worn or defective.
To assemble
1. Fit the 4 shift rails in the order 1-2, 3-4, 5 and reverse. Position the rails so that the driver grooves are opposite each other.
