9-3 (9440) L4-2.0L Turbo (2007)
/l4-2.0l_turbo/Page-4888006.png)
18. Use a ratchet handle to wind the wire coiler so that the wire cuts through the bead of adhesive. If necessary, use the protective tool with suction
cup between the cutting wire and metal to prevent the wire cutting against the metal. Move the wire coiler successively to maintain a suitable
angle.
An acute angle cuts better. If necessary, use the other wire coiler to help. If there is a risk of the wire breaking, stop winding for 10-15 seconds to
allow the wire time to work through the adhesive.
