9-3 (9440) L4-2.0L Turbo (2.0 HOT) (2003)
Windshield Washer Reservoir: Service and Repair
Washer Fluid Reservoir
To remove
1. Drain the washer fluid from the reservoir.
2. Remove the battery cover and the washer fluid reservoir filling pipe.
3. Remove the front bumper casing.
4. Unplug the level sensor connector.
5. Disconnect the washer pumps from the reservoir and allow them to hang from their hoses and wiring.
6. Remove the washer fluid reservoir.
7. Remove the washer fluid level sensor from the reservoir.