9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-59003.png)
2. Fit and tighten the bolts securing the valve.
NOTE: If the "green" valve has been changed: Turn back the "orange" valve and tighten the bolts.
3. Plug in the valve's connector.
IMPORTANT: The hydraulic valve connectors have the following colors: Blue, green and orange. The top of the valve housing is
marked for the respective colour: "B" for blue, "G" for green and "O" for orange.
4. Open and close the soft top for 5 complete cycles to bleed the system and check its function.
5. Check for any fluid leaks.
6. Check the oil level and top up as necessary. See Checking/filling oil. Use 89 96 860 Power steering fluid.
7. Connect the diagnostics tool and erase any diagnostic trouble code.
8. Fit Luggage compartment side trim.
