9-3 (9440) V6-2.8L Turbo (2008)
Headlamp Alignment Control Module: Adjustments
Control Module Calibration AHL/AFL
Check the following points before starting calibration.
^
The car should be level.
^
The car should be unloaded.
^
Check that the light image has not been reset to the right-hand/left-hand traffic "tourist solution"
^
Stabilise the suspension by rocking the car.
^
The handbrake must not be applied.
^
Steering wheel and wheels in straight-ahead position.
^
Ignition in ON position
^
The Xenon lamps should be lit.
^
Battery voltage must be >10.5 V.
Connect the diagnostic tool and calibrate the AHL/AFL control module.
Check the function of the headlamps and clear any DTCs.
Check the light setting and adjust as necessary.