9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-4897001.png)
Windshield Moulding / Trim: Service and Repair
The A Pillar Trim Moulding, CV
To remove
1. Retract the soft top.
2. Pull out the windscreen frame seal from the A pillar trim moulding. Start at the bottom edge.
3. Undo the screws from the A pillar seal mount. Remove the mount.
4. Pull out the trim moulding from the corner of the rubber moulding and pull away the thin rubber moulding.
