saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 12525 > < Initial Inspection and Diagnostic Overview|Page 12523
Page 3
background image

Conditions

-

Ignition ON.

-

Radio on

-

No DTCs stored with the fault symptom in question.

-

Reprogramming with CD, OCP software has been performed (symptom does not apply to normal SPS programming).

-

Symptoms apply to cars up to VIN 41018643.

ICM 3, Display Shaking

ICM 3, Display Shaking

Fault symptom

ICM display missing

Diagnostic help

See menu "All - Add/Remove"

ICM 3, Display Too Bright In Extreme Cold

ICM 3, Display Too Bright In Extreme Cold

Fault symptom

ICM display too light

Conditions

No DTCs stored with the fault symptom in question.

Diagnostic help

-

In severe cold, it is normal for the display to be brighter than normal for the first 10 minutes after starting.

-

No action required, inform the customer.

Jumping Menus on ICM Display

Jumping Menus On ICM Display

Fault symptom

The menus in the ICM display jump without reason.

Conditions

-

No buttons have stuck on the ICM.

-

No DTCs stored with the fault symptom in question.

Alarm LED, Not Flashing

Alarm LED, Not Flashing.

Initial Inspection and Diagnostic Overview|Page 12525 > < Initial Inspection and Diagnostic Overview|Page 12523