9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-3440006.png)
4. Lift the subframe into place and align 83 96 137 Centring tool, subframe - body with the locating holes in the body.
5. Lift the subframe so that the inner sections of the bushes are pressing against the body. Fit the front subframe bolts on both sides.
Tightening torque 75 Nm +135° (55 ft. lbs. +135°)
Fit the stays and the rear subframe bolts on both sides. Enter the rear stay bolts before tightening the subframe bolts.
Tightening torque 75 Nm +135° (55 ft. lbs. +135°)
Lower and pull away the trolley lift.
6. Tighten the rear subframe bolts.
Tightening torque 90 Nm +45° (66 ft. lbs. +45°)
7. Fit the steering gear with bolts, washers and nuts.
Tightening torque 50 Nm +60° (37 ft. lbs. +60°)
