9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-3732001.png)
Convertible Top Hydraulic Cylinder: All Technical Service Bulletins
Body - Convertible Top Hydraulic Cylinder Leaks
Bulletin Number: 811-2546
Date: May 2005
Market: all
Oil leakage when replacing a hydraulic cylinder
This bulletin advises on a supplement to the methods for replacing the hydraulic cylinders and it comes into immediate effect. The reason edition of WIS
will include the information.
Cars affected
Saab 9-3 (9440) CV
Background
It has come to our attention that oil leakage may arise during replacement of the hood system's hydraulic cylinders. The reason for this is that the spare
part's 0-rings have not been removed which has resulted in two 0-rings being fitted.
Symptom description
Oil leakage at hose connections.
Parts required
Not affected.
Procedure
When replacing a hydraulic cylinder, the following procedure must be carried out:
1.
Remove the spare part's 0-rings using a blunt tool. Then fit the 0-ring on the hydraulic line before the lines are refitted to the hydraulic cylinder.
Only one 0-ring shall be used.
Warranty/Time Information
Fault diagnosis procedure is not available.
Disclaimer
