9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-3779004.png)
5. Put the cover plate in mounting position.
6. Fit the cover plate clip.
7. Operate the soft top to check the operation of the soft top.
8. Test the operation of the soft top.
9. Connect the diagnostics tool and erase any diagnostic trouble code.
Position Sensor, First Bow Ready to Lock (561)
Position Sensor, First Bow Ready To Lock (561)
Removing
Only the latch fitting on the left-hand side of the windscreen frame has position sensors.
1. Remove Windscreen frame upper rim, CV.
2. Unplug the position sensor connector.
