9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-3858015.png)
1. Plug in the motor.
2. Fit the motor's lower pivot pin.
3. Fit the upper bracket for the adjustment shaft by pressing down the rear edge of the seat frame while threading and tightening the bolt.
4. Fit the lower clip to the motor.
5. Fit the seat cushion.
6. Fit front seat side panel.
7. Fit the seat.
8. Test run the height adjustment motor.
Motor, Slope Adjustment, Electrically Operated Seat (357b), CV
Motor, Slope Adjustment, Electrically Operated Seat (357b), CV
To remove
1. Move the seat to its highest position.
