9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2184003.png)
4. Fit the retaining spring to the brake caliper. Position the upper edge and centre of the spring. Then press home the lower end of the spring. Make
sure the lug engages.
5. Remove the brake pedal clamp and refit fuse 6 in the instrument panel electrical centre 22.
6. Bleed the brake system.
7. Fit the wheel.
Tightening torque 110 Nm (81 ft. lbs.)
8. Lower the car.
9. Depress the brake pedal repeatedly in order to press out the brake pistons.
10. Check the brake fluid level and top up as necessary.
