9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
3. Place the hydraulic body into the carrier.
Fit the guide pins.
Tightening torque 28 Nm (21 ft. lbs.)
4. Fit the protective covers.
5. Fit the retaining spring to the brake caliper. Position the upper edge and centre of the spring. Then press home the lower end of the spring. Make
sure the lug engages.
6. Fit the wheel.
Tightening torque 110 Nm (81 ft. lbs.)
7. Lower the car.
8. Depress the brake pedal repeatedly in order to press out the brake pistons.
9. Check the brake fluid level and top up as necessary.
10. Check the operation of the foot brake.