9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
5. Adjust the joint clamps so that the pipe ends are in the middle of the clamp.
6. Adjust the front and rear silencers so they hang evenly.
7. For cars with visible tailpipe, adjust this so that it hangs in the centre of the tailpipe cutout in the rear bumper.
8. Tighten the joint clamp nuts. CV: Fit Chassis reinforcement, centre tunnel, CV
Tightening torque 40 Nm (30 ft. lbs.)
9. Lower the car
10. Connect an exhaust hose and start the engine. Check the exhaust system for leaks.