9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
Headlamp Alignment Control Module: Service and Repair
Control Module, AHL (664)
To remove
Carry out actions before removing control module.
1. Remove the battery cover lid.
2. Remove the filler pipe of the washer reservoir.
3. Remove the main fuse box cover.
4. Remove the nuts.
IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight
apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection.