saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Lighting - Water Leakage Into Tail Lamps|Page 18756 > < Lighting - Water Leakage Into Tail Lamps|Page 18750
Page 1
background image

Tail Lamp: Customer Interest
Lighting - Water Leakage Into Tail Lamps

Bulletin Number: 351-2513

Date: December 2004

Water Leakage in Boot Lid Light Cluster

Cars Affected:
Saab 9-3 (9440) CV M04 - M05 up to and including Vehicle Identification Number 56001652

Background

In certain cars the seal for the boot lid light cluster is fitted in the wrong position.

This means that water can penetrate into the lamp housing.

In the case of customer complaint, the following procedure must be carried out.

Symptom description

Water leakage in boot lid light cluster.

Parts Required

16 - 32 025 043 (CA: 10953479) Rubber moulding adhesive (sufficient for 25 light clusters)

Procedure

1.

Remove the light cluster, see WIS 3. Electrical System - Lighting and signalling systems - Exterior lighting - Adjustment/Replacement - Rear
lamp, boot lid, CV.

2.

Remove the seal from the lamp housing.

Lighting - Water Leakage Into Tail Lamps|Page 18756 > < Lighting - Water Leakage Into Tail Lamps|Page 18750