9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-141003.png)
4. Fit the screws and ground line to the MacPherson strut tower. Ensure that the washer is placed under the cable shoe.
Tightening torque 25 Nm (18 lbf ft)
IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further
information regarding connectors, refer to Connectors, handling and inspection.
5. Attach the connector to the control module.
6. Refit the battery cover and battery.
7. If control module is changed: Carry out the procedure for changing the control module.
