9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2583004.png)
17. Remove the clamps securing the pipe to the subframe.
18. Bend down the pipe under the subframe.
19. Feed the cooling circuit out under the subframe.
To fit
1. Feed the cooling circuit in between the body and subframe.
2. Fit the cooling circuit loosely by its right-hand mounting to the radiator member.
3. Fit in the rear pipe between the gearbox and the subframe. Remove the plug and connect the pipe to the steering gear using a new O-ring. Secure
the connection by hand.
