9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
Fluid Pan: Service and Repair
Valve Housing Cover
To Remove
1. Add the wing cover. Set gear position P and apply the handbrake. Raise the car. If a track lift is used the wheels must be blocked.
Remove the front spoiler shield.
Convertible: Remove chassis reinforcement, front subframe, CV.
2. Position a container under the car, connect a hose and drain the cooling system.
3. Drain the gearbox oil via the bottom plug. Fit the plug with a new seal. Use protective gloves.
Tightening torque 45 Nm (33 ft. lbs.)
Warning: The oil may be very hot if the car has just been driven.
4. Remove the oil cooler hose connections from the gearbox. Plug the connections.