9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2013001.png)
Constant Velocity Joint: Service and Repair
Inboard Drive Shaft Universal Joint, Automatic
Inboard drive shaft universal joint, automatic
To remove
Important: The drive assembly is very susceptible to dirt.
1. Clean the drive shaft thoroughly.
2. Set up the drive shaft in a vice with soft jaws.
3. Undo the clamping ring on the boot.
4. Remove the inboard universal joint and clean away the grease.
5. Set up the shaft in a hydraulic press. Use 87 91 212 Puller ring for support and plastic tiles to protect the bearings. Use a 17 mm socket as a drift.
6. Remove the boot from the drive shaft.
To fit
1. Fit the boot onto the drive shaft.
