9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2021001.png)
Flex Plate: Specifications
19. Apply 74 96 268 Thread locking adhesive to the bolts holding the torque converter to the driver plate.
Note: Use the original bolts and washers. Using longer bolts will damage the torque converter.
20. Fit the 6 bolts without tightening them.
Rotate the engine clockwise with the pulley and tighten the bolts once they are all in place.
Tightening torque 30 Nm (22 ft. lbs.)
