9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-3354001.png)
Trunk / Liftgate Weatherstrip: Description and Operation
Door And Boot Lid Seals
1. Door opening seal
Seals between the door and the A-pillar, sill and B-pillar. It is pressed onto a metal flange and secured to the sill with seven clips plus one clip on
the rear end of the seal.
2. Sill seal
Seal between the bottom of the door and the sill. It is pressed onto weld screws in the sill.
3. Door opening, rear edge
Seals between the rear edge of the door and the B-pillar. It is secured with eight clips.
4. Luggage compartment opening
Seals between the boot lid and the luggage compartment. It is pressed onto the metal flange around the luggage compartment.
