9-3 Convertible (9400) L4-2.0L Turbo (2.0 HOT) (2003)
/l4-2.0l_turbo_(2.0_hot)/Page-1568020.png)
Part 12
Diagnostic procedure:
1. If a value is already displayed for "Failure Status" before the engine is started
NOTE: "Failure Status" and "IDM Check Code". Remedy in accordance with the table above. If the car is under warranty, state "IDM Check
Code" on the warranty report.
2. If no value is displayed for "Failure Status" before the engine is started
Run the diagnosis in accordance with the instructions in the "Information Text" field on the Tech 2 screen. If a value for "Failure Status" is
displayed during starter motor cranking, during the synchronisation phase or after the ignition key has been released back to ON after an attempt at
starting, note "Failure Status" and "IDM Check Code".
Remedy in accordance with the table above. If the car is under warranty, state "IDM Check Code" on the warranty report.