saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Computers/Controls - Multiple System Malfunctions|Page 8125 > < Wheel Sensor/Front Left|Page 8113
Page 1
background image

Technical Service Bulletin # 365-2568

Date: 050701

Computers/Controls - Multiple System Malfunctions

Bulletin Number: 365-2568

Date: July 2005

Market: all

Electronic problems

This bulletin describes some known electrical problems.

Several of this fault symptoms have already been described in WIS. WIS will be supplemented with this new information.

Cars affected
All Saab 9-3 (9440) 4D and CV

Parts required

See EPC.

Warranty/Time Information

See applicable times in STM.

Disclaimer

CIM, ISM, and SCI - Fault Symptom

CIM, ISM and SCL - fault symptom

1.

CIM - All remote controls inoperable.

Cars affected:
Saab 9-3 (9440) 4D up to VIN 41021535
Saab 9-3 (9440) CV up to VIN 46006859

Background:

All remote controls are inoperable. No DTC. It is, however, possible to start the car.

Procedure:

Update CIM software.

Note:

New CIM software was introduced as of VIN 41021536 (4D) and 46006860 (CV).

2.

One of the remote controls is inoperable.

Cars affected:
Saab 9-3 (9440) 4D up to VIN 41063612
Saab 9-3 (9440) CV up to VIN 46019650

Background:

The remote control is operable, but it is possible to start the car.

DTCs in CIM: B3114, B3115, B3116, B3117 and B3118.

Procedure:

Computers/Controls - Multiple System Malfunctions|Page 8125 > < Wheel Sensor/Front Left|Page 8113