9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
CD Changer: Description and Operation
CD Changer
WARNING
The CD changer is a Class 1 laser product
-
The CD changer should be serviced and repaired only by a qualified engineer.
-
If the casing of the CD changer is damaged, laser radiation can occur with a risk of injury.
The CD-changer is an option, the following variations are available for installing the CD-changer:
1
Standard,installation is possible via a connector in the front of the car. Additional wiring harness and CD-changer are required.
2
Prepared,the car is completely prepared for a CD-changer which means that all leads to/from the CD-changer are included in the car's wiring
harness.
3
CD-changer,the car is delivered with a CD-changer, wiring harness according to point 2.
The CD changer is connected to the wiring harness and bus via a 12-pin connector.
The CD changer is activated by:
AS1: Pressing the CDC button on the main unit.
AS2, AS3: Pressing the CD button on the main unit once if the CD player is active.