saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Bonnet-Release Cable And Release Lever|Page 10290 > < Bonnet-Release Cable And Release Lever|Page 10288
Page 2
background image

5. Remove the DICE module, located under the knee guard on the driver's side, proceed as follows:

-

Lift away the cover from the fuse holder.

-

Remove the lower section of the instrument panel by the driver's side.

-

Remove the floor air duct, fastened with a screw at the bottom of the fuse holder.

-

Remove the DICE module as well as the relay holder by removing the plastic nut securing the relay holder console and the two relay holder
retaining screws.

6. Remove the two fuse holder retainer bolts and bend it to the side.

Bonnet-Release Cable And Release Lever|Page 10290 > < Bonnet-Release Cable And Release Lever|Page 10288