9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
Diagnosis
-
If the control module loses track of the crankshaft position while the engine is running, diagnostic trouble code P0336 will be generated.
-
If the crankshaft position is absent, the engine will not start
System reaction to a fault
-
There is no substitute value for the crankshaft position sensor.
Engine speed signal
The control module transmits the engine speed signal from pin 58.
The signal is a pulse train that varies between 0 and B+ and is approx. 30 Hz at idling speed and approx. 85 Hz at 2500 rpm. This corresponds to 2
pulses per crankshaft revolution.
The engine speed signal is used by the main instrument unit and the automatic transmission control module.
Diagnosis