9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
15. Undo the 3 control module retaining nuts.
To Fit
The mounting of the control module is directionally dependent. The Supplementary Restraint System (SRS) will not work if the control module is fitted
incorrectly.
When a control module is being replaced the new module must be programmed in order to work properly. This is effected using a diagnostic instrument
that has the function "Programming".
WARNING: Do not connect the control module before it is fitted.
1. Fit the control module in position.