9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
/l4-2.0l_turbo_(b204)/Page-2062002.png)
compound (87 81 841 ) in a thin and even layer over the entire sealing surface. On a dismantled gearbox, the sealing compound can be applied on
the sealing surface of the cover.
2. Position the cover.
3. Fit the cover with the 8 retaining bolts, not the bolt securing the cover for the temperature sensor.
Tightening torque: 25 Nm (18.5 ft. lbs.)
4. Fit the temperature sensor's cover.
Tightening torque: 25 Nm (18.5 ft. lbs.)
5. Reconnect the oil cooler hoses to the gearbox. Make sure that they do not rest against the subframe.
6. Fit the bracket for the engine mounting.
7. Connect the ground cable.
8. Fit the engine pad.
9. Fit the air shields.
10. Lower the car and remove the lifting beam.
11. Fit the cover over the intake manifold, alternatively the resonator, with hoses and mass air flow sensor.
12. Fill transmission fluid DEXRON Ill. (mineral oil based).
13. Warm up the engine and transmission. Check the fluid level and operation of the transmission.