9-3 Coupe (9400) L4-2.0L Turbo (B204) (1999)
/l4-2.0l_turbo_(b204)/Page-2278003.png)
5. Make sure that the gate positions marked on the knob and the carrier stop lug are correctly positioned in relation to the bearing hole at the bottom
of the gear lever (so that the gate position markings are correctly positioned in the car). Fit the knob loosely on the lever so that it fastens in the
splines.
6. Place the gear lever in a vice. Tap the knob with your hand or a light rubber hammer until the stop lug on the carrier is no more than 0 - 0.5 mm