9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
Distance on remaining fuel
"x x x" km (miles)
Average fuel consumption
"- - -"
Average speed
"- - -" km/h (miles/h)
Operation of SID 2
Select function
By pressing Dot (-) or Arrow (+), all trip computer functions will start for 12 seconds.
To select from the menu of "exclusively SID 2" functions in the left-hand column, use the Dot (-) button.
To select from the right column, use the Arrow (+) button.
Reset function
To reset the trip computer functions, hold down the CLR button for more than 4 seconds. Resetting to zero is indicated by a brief acoustic signal at the
same time as the text "CLEARED" appears on the display for 2 seconds.
Functions concerned are:
The display shows
Distance on remaining fuel
"xxx" km (miles)
Average fuel consumption
"- - -"
Average speed
"- - -" km/h (miles/h)
Distance to destination
0 m ->
NOTE The values programmed in DIST/ARRIV are not reset.
Setting the values
Select the function and then hold the SET button down for more than 1 second, whereupon an acoustic signal will be heard.
Increase or reduce the value of the selected function by using the Dot (-) or Arrow (+) button. Confirm the setting by pressing the SET button briefly.
If the function (ALARM, SPD W) is activated, this will be indicated with an asterisk in the top row. To deactivate the function, press CLR and the
asterisk will go out. Press SET to reactivate ALARM, SPD W, etc.
The set values are retained when the ignition is OFF.