9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
1. Lift the hydraulic unit into position, taking care not to damage the pipes.
2. Fit the two nuts.
Tightening torque 20 Nm (14.8 ft. lbs.)
3. Remove the plugs and reconnect the brake pipes. Fit the brake-pipe nipples (rear pipes first) finger tight and then tighten with a spanner.
4. Plug in the connector.
5. Fit the main fuse box in place.
6. Bleed the brake system.