9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
^
Check all sensor inputs and signals from other systems.
^
Finally, check the control module outputs. Remember that the readings do not provide an indication that the actuator is operating.
^
If any reading is not OK, consult the wiring diagram to trace the leads, connectors or components that need further checking.
^
The specified readings are valid for a correctly calibrated Fluke 88/97.
^
The readings %(+) and ms(+) indicate the pulse ratio and pulse length. A test instrument capable of measuring both pulse ratio and pulse length
must be used. The '+'sign denotes a positive trigger pulse (TRIG+).
Connection, test readings
ABS 5.4 Connection, Test Readings
Important: The readings apply to measurements taken on the control module's connector (unplugged) unless otherwise stated.