saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Procedures|Page 2492 > < Procedures|Page 2490
Page 9
background image

29. Unhook the condenser from the mountings on the radiator.
30. Tilt the radiator away from the radiator crossmember and disconnect the vent from the expansion tank.
31. Cut off the clip securing the A/C compressor cable to the radiator.
32. Lift out the radiator.

To fit 
1. Lubricate the radiator upper rubber bushes with non-acidic Vaseline, part no. 30 06 665, or the equivalent.
2. Lift the radiator into place but do not press it home.

Procedures|Page 2492 > < Procedures|Page 2490