saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Trunk/Liftgate Sensor/Switch (For Alarm) > < Disconnecting the Glass Breakage Sensor|Page 644
Page 2
background image

1. Replace the connector. Ensure that the connector is properly seated and attached to avoid vibrations.
2. Fir the switch panel. Start with the front edge and push it forwards. Then press the rear edge upwards.
3. Fit the lens cover.

Trunk/Liftgate Sensor/Switch (For Alarm) > < Disconnecting the Glass Breakage Sensor|Page 644