9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
/l4-2.0l_turbo_(b205)/Page-1585004.png)
3. Move the gear lever to the right towards the reverse gear stop and check the vertical position of the carrier. The upper edge of the carrier's stop lug
should be 0 - 0.5 mm above the reverse gear detent stop.
4. If it is necessary to adjust the height of the stop lug, see ->.
Gear Lever Joint Bushes
Gear Lever Joint Bushes
Change bushes when there is play in the joint.
1. Remove the selector rod as described in.
2. Tap out the spacer sleeve using a drift.
3. Remove and change bushes.