9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
![background image](/saab/9-3_coupe_(9400)/l4-2.0l_turbo_(b205)/Page-1585010.png)
2. Mount the gear lever in a vice.
3. Attach tape around the carrier, directly under the knob, to prevent it being damaged or scratched when it is being removed.
4. Place a 32 mm open-ended spanner under the edge of the knob. Carefully tap the hammer from underneath using a hammer. Lift off the knob and
carrier.
5. Remove the tape. Remove the knob from the carrier by using a small screwdriver to press in the three plastic lugs on the carrier (located under the
numbers 1, 5 and 4 on the knob). Note the steel spring under the knob.
Important: A gear lever knob which has been removed must not be refitted but replaced with a new one.
To fit
1. Check that the ball socket ring is on the gear lever.