9-3 Coupe (9400) L4-2.0L Turbo (B205) (2001)
Changing the Gear Lever Bearing (Ball Socket and Ring)
Changing The Gear Lever Bearing Arrangement (Ball Socket And Ball Socket Ring)
To remove
1. Remove the gear lever as described in ->.
2. Remove the spring which tensions the ball socket ring and detach the ball socket ring by turning it anti-clockwise (bayonet fitting). Remove the
ball socket.
3. The gear-lever knob must be removed in order to detach the ball socket ring, see .
To fit
1. Lubricate the bearing with Gleitmo 750, see ->.